Shoe Sole RA

Model：KP-1172

Characteristic：Water-based concentrated product, bright surface

Scope of application：It can be applied to the soles of PU, TPU, TPR, EVA, etc. It can also be used for polyurethane self-skinning, rigid foam, semi-rigid foam, rims and rubber, and also suitable for epoxy resin molding process.

Performance advantage：

1. There is little mold fouling.
2. The working temperature is between 60-100℃.
3. Use brush or spray gun.
4. In the second case, adjust the air pressure to promote drying and reach all corners of the mold.
5. Depending on the difficulty of the finished product, it can be diluted at a ratio of 1:30-1:50.
6. The surface of the product is bright.
7. This product contains polydimethylsiloxane.

Model：KP-117-SG2

Characteristic：Water-based concentrated product, matte surface

Scope of application：It can be applied to the soles of PU, TPU, TPR, EVA, etc. It can also be used for polyurethane self-skinning, rigid foam, semi-rigid foam, rims and rubber, and also suitable for epoxy resin molding process.

Performance advantage：

1. There is little mold fouling.
2. The working temperature is between 60-100℃.
3. Use brush or spray gun.
4. In the second case, adjust the air pressure to promote drying and reach all corners of the mold.
5. Depending on the difficulty of the finished product, it can be diluted at a ratio of 1:30-1:50.
6. The surface of the product is matt.
7. This product contains polydimethylsiloxane.